Picture
Oops. I mean to do this more often. If for no other reason than my own memory is short and it's nice to look back.

So we spent February, March and half of April making pots for firing #2. Auvery was trying out a couple of new forms and some heavy slip decorating.

I was trying to throw some big pots using a mix of coil and throw and sectional throwing techniques. I'm starting to figure out what works and what doesn't, for me anyways. 

Picture
We set a firing date for the end of April because after that the farm demands a lot more attention with spring seeding. So we made pots and made more pots. Gotta have enough right?

We also had to mix and sieve glazes, mix up some wadding and clean and wash kiln shelves. Ugh. I think I spent 3 days and went through a dozen grinding wheels cleaning off the kiln shelves from firing #1. Not a lot of fun.

We also had to cut a split wood. I recruited some friends to help me split wood the weekend before the firing. So it decided to snow. But we soldiered on.

Our buddy Patrick made this awesome video of our adventures that day. Check it out!

Picture
By the next weekend the snow was gone for firing #2. It was 25 hours long this time around. It was a little more difficult this time with the wind blowing and gusting hard for the last half of the firing, bringing a little bit of rain and sleet with it. We also had some issues with back pressure at the firebox around 1800 degrees F. After stressing and futzing around for an hour, Jeffrey and his superphone research saved the day.
Firing #2 wasn't as successful as #1 as there were some cool spots in the kiln, a result from ember and ash build up in the firebox. And using less salt affected the final results. But lessons have been learned and strategies put in place for #3. And there were quite a few beautiful pots in this kiln, more than enough to keep us motivated. Our good friends Jeffrey and Tanjia Heyden-Kaye came out and took pictures of a few of the winners.

Two days after the firing we were off to Calgary to drop off a couple pots that were juried into the Alberta Potters Association show "Off Centre" at Webster Galleries. It is a beautiful two story space and we were quite excited to be a part of the show. The show was being held in conjunction with the APA Off Centre symposium the next weekend. Unfortunately we weren't able to get there because as soon as we got home from dropping of the pots at the gallery, we unloaded the kiln (with mixed emotions), and the next day it was straight to long days in the field. I wasn't able to really digest and look at the results of the firing for a couple of weeks. Like I said earlier, I now have an idea of what we will do differently next time. But for now the pots are cleaned and organized and thoughts for the next round of making are percolating. Its time to fit in some throwing around the busy summer jobs and activities.
 
Holy smokes I'm a bloggin again! I'm sure one or two people were wondering when that would happen again. Well, it's happening! Hold on tight! Weeee!
Well we are pretty happy that the studio has seen a little action in the last month. The winter months have often slipped away studiowise the last few years, so any work done before spring just means we're ahead of the game. Spurring us along is the idea of the the first firing in the wood kiln. Got to have some pots to fire in it, right?
So I had me a plan see? I had a few loose ends hanging around in the form of a couple orders, for lack of a better word. I needed to throw a few more things in the cone 6 stoneware we've been using for the last 10 years.
Picture
Don't get the wrong idea here folks. The throwing took a little while. An hour here and there after the boys go to bed or after the cows get fed. But it starts to add up.

Anyways, I had planned to finish up with our old clays and switch to the new clays we'll be using in the wood kiln (the new clays will tolerate the higher temperatures of the wood kiln). But first I wanted to get our second wheel working again.
We had picked up a used Soldner wheel a couple of years ago when we were still scavenging for bricks. It worked great for a couple of months then gradually died. I thought the problem was in the pedal and after lots of grunting, headscratching, cursing and generally unhelpful tinkering, I finally ordered a new variable transformer for the pedal. Got it for less than half price on ebay. (Pat myself on the shoulder.)
So Dakota and I got busy swapping out the old for the new transformer yesterday. It took a little more mucking around than I had planned but I got there (Dakota got distracted). I hook it back up to the wheel andddd...? Nothing. Fudge. "I believe the problem is in the motor." Thanks Sherlock. Now I'm going to see whether anyone in town can fix a 1/2 hp DC motor or if I have to haul it up to Edmonton. I'm sure it will be cheap. Ugh.

Oh well. I think I will start switching clays anyways. It might be interesting as I haven't thrown with anything different in a long time. Clay can be tricky don'tcha know?
 
Picture
A short while ago we fired the kiln, it has been ages since most of Joe's clay time has been spent working on the wood kiln. I was motivated by a visit from friends and relatives and friends who are relatives wanting to see and purchase new work that I was nimmer-nammering about earlier in the summer. The work was finished and it was good!!! I am a slow learner but I am finally doing more planning and less seat-pants flying, subsequently I end up with more success out of the kiln. I have plans for the fall, I plan to spread the joy of clay to youngin's in the community (whether they like it or not!) and send my work out into the world beyond the four walls of the barn. I have also attempted a new item, the "yarn bowl" I am told knitters go knuts for the things and a snappy yarn shop in Calgary wants to order some for Christmas. 
    The new work was some of the most beautiful I have ever made and many pieces already found new homes (I barely got to know them).