Wowee, six months goes by fast! We've been busy, both on the farm and in the studio. I guess we'll start this post from where we finished with the last one.
Once the kiln was finished, it was time to make some pots! We had no idea how many pots the kiln would hold or how the clays and glazes would turn out. It was a real gamble. We had to decide what kind of forms we had to have in this first firing, from a selling view point and from our own point of view as artists.
Even Dakota came out to the studio to throw some pots for the kiln.
Once harvest was done, it was time to set a deadline. I wanted to fire the kiln before winter really set in. A little snow wouldn't stop us. We needed to split and stack wood, clean and wash kiln shelves and bisque fire and glaze and slip our pots. I hoped we had enough wood and enough pots.
So after two days of splitting wood and three days glazing and slipping the pots, we spent a day and a half loading the kiln. Now we would find out if we had enough pots. We have to wad every pot to keep them from sticking to the shelves with ash and salt. That became tricky as the temperature dropped because the wadding started to freeze.
The firing started at 4 am Saturday and finished twenty four hours later. I had a few hours on my own at the start of the firing to figure a few things out. Get a draft going in the chimney, muck with the pyrometer, see how much wood to stoke with, stuff like that.
We are so lucky to have such supportive friends and family. My mother in law came from Saskatchewan to help with the boys when we were loading the kiln. My mom and dad watched one of the boys and our great friend Andrea watched the other while we fired the kiln. And my best buds Jeff and Jeffrey came and stoked and split wood and sprayed salt right til the very end. It was all very much appreciated. Plus both of the guys are awesome photographers so we have some excellent pictures of the firing.
You know it's been just about two months since we fired the kiln and I'm still digesting and processing the experience. The idea of the wood kiln had been just that, an idea, for so long. But after the last two years dismantling, moving and rebuilding the kiln, finally firing it felt like a real culmination of a lot of things. A finish line. It was but it isn't. Now there is a solid starting line for our future work. We have an idea of what we can get out of the kiln, what works, what doesn't and what we can change. I look at the work from the first firing and the gears start turning about what's next. Very exciting. Plus the guys are wondering when they get to fire the kiln next.
Here's some before and after shots of pots in the kiln and some shots of some of the best to come out of firing numero uno.
Holy smokes I'm a bloggin again! I'm sure one or two people were wondering when that would happen again. Well, it's happening! Hold on tight! Weeee!
Well we are pretty happy that the studio has seen a little action in the last month. The winter months have often slipped away studiowise the last few years, so any work done before spring just means we're ahead of the game. Spurring us along is the idea of the the first firing in the wood kiln. Got to have some pots to fire in it, right?
So I had me a plan see? I had a few loose ends hanging around in the form of a couple orders, for lack of a better word. I needed to throw a few more things in the cone 6 stoneware we've been using for the last 10 years.
Don't get the wrong idea here folks. The throwing took a little while. An hour here and there after the boys go to bed or after the cows get fed. But it starts to add up.
Anyways, I had planned to finish up with our old clays and switch to the new clays we'll be using in the wood kiln (the new clays will tolerate the higher temperatures of the wood kiln). But first I wanted to get our second wheel working again.
We had picked up a used Soldner wheel a couple of years ago when we were still scavenging for bricks. It worked great for a couple of months then gradually died. I thought the problem was in the pedal and after lots of grunting, headscratching, cursing and generally unhelpful tinkering, I finally ordered a new variable transformer for the pedal. Got it for less than half price on ebay. (Pat myself on the shoulder.)
So Dakota and I got busy swapping out the old for the new transformer yesterday. It took a little more mucking around than I had planned but I got there (Dakota got distracted). I hook it back up to the wheel andddd...? Nothing. Fudge. "I believe the problem is in the motor." Thanks Sherlock. Now I'm going to see whether anyone in town can fix a 1/2 hp DC motor or if I have to haul it up to Edmonton. I'm sure it will be cheap. Ugh.
Oh well. I think I will start switching clays anyways. It might be interesting as I haven't thrown with anything different in a long time. Clay can be tricky don'tcha know?
Well it looks like winter is just about here. A couple small skiffs of snow and a drop in temperature tell me it's time to get some work done in the studio.
The kiln November 10, 2011
Where did we last leave off? Oh yes, I was working on the kiln. Still. A long process I know but it looks more like a real kiln all the time. The metal frame needed a little welding before being assembled.
The arch was cast, the fire box was started, the stoking door was hung. I was able to reuse the cast arch over the door. I got far enough along that I was able to place the old castable roof on top of the firebox. It came apart in a few pieces, but with a little help I think I can get them to fit a little tighter and probably do a light skim coat of new castable on the top in the spring.
But it's too cold to lay brick now. I'm not a wimp, the mortar freezes up. Really. So it's off to the studio. Just in time because the third annual Wintertide show and sale is coming. We have lots of pots but it is a good excuse to get working on some new stuff. I was a little rusty on the wheel since I hadn't thrown anything for a few months but it's coming back to me. I think.
November 25th and 26th the place to be is the Elks Hall in Ponoka. Come on down and see the show. We should have at least one kiln load of brand new work and our good friend Shelagh Blatz of Design by Shelagh /
will be joining us this year so it should be very exciting. Check out her website at http://designsbyshelagh.com
See you there,
Dakota and Grant are getting ready for school so it felt like an appropriate title. Well its been more than a month since the last blog entry and boy, did things not really change since then. It took us until last week to finally get our first cut of hay done. It has been a wet month. But once we got done we borrowed Mom and Dad's trailer and hit the road.
We hit Calaway Park our first day. The boys are braver than I am. Koda grew enough this last year to just squeak on to the roller coaster. Twice! After that busy day it was out to the mountains.
John Chalke mug
We went in to Banff one afternoon and visited the Willock-Sax gallery where we picked up a couple of souvenirs. I picked out a nice little salt/soda fired mug by John Chalke.
Barbara Tipton tumbler
And Auvery picked out a nice piece by Barbara Tipton, John's wife.
Velvet Antler Pottery
Our last day in the mountains we decided to drive out to Field, BC, home of Velvet Antler Pottery and our friend Ryan Cameron. He is one the friendliest people you'll ever meet. We go out to visit every year or two and he and his wife Kathryn are always so helpful and inspiring about pottery.
Ryan Cameron cup
Ryan was heading out the door for lunch when we got there but showed us some of the new pottery before he left. Telling him about using one of his cups as my favorite for rye, he gives me a new one. A beautiful little carbon trap shino cup with a little bit of chattering around the rim. So nice! Thanks Ryan.
We took the boys over to the school playground while Ryan went for lunch. Then we went back for a little more clay talk and to pick out a couple more souvenirs.
Ryan Cameron porcelain cup
Ryan Cameron porcelain cup
Ryan is throwing and glazing this porcelain so it is actually translucent. It's like far out future space pottery.
Then it was back home for my awesome wife's birthday party. The unicorns were plenty.
The next day we loaded a long overdue bisque kiln, inspired by our trip. It's now unloaded, with pots ready to glaze. A trip tomorrow to pick up castable for the wood kiln and hopefully a firing or two in the electric kiln before harvest comes to take me away. Summer is coming to an end, but hopefully not for another two months.
Remember, safety first.
Yippee, big news, Joe and I entered work into a show this spring...and what do you know we each had a piece accepted! SMILES! The show is a juried travelling exhibiton put together by the Alberta Potters Association. The piece I have in the show (pictured left) is called "Myth and Magic sipping cup"... a groovy little number featuring layered stamping, text, and a graphic carved section with an amphora flowing before a sea of alchemic symbols...you know that old chestnut. Joe's piece is a lidded vessel titled... "lidded jar", the man is inspired, right? Let me expand on that, it is a small, amber colored lidded jar, textured to be subtly reminiscant of the texture repeated in the cultivated fields of the farm. This show will start June 25th to Sept, 15, in Lethbridge, Alberata, at the Sir Alexander Galt Museum, then it will travel to Comox B.C. to the Comox Valley Art Gallery, Oct.1st to 31st, next the pieces land in The B.C. Gallery of Ceramics, Granville Island, Vancouver, B.C. from Nov.1st to Nov.30th. There may be more possible dates for the show in 2012. Wow, my pottery will do more travelling than I will!